With unique internal wiring design, built-in IMU gimbal control module, specialized servo drive module, this gimbal is able to support Pan Follow (PF) mode and First Person View (FPV) mode. Moreover, video out and battery charging of GoPro Hero 3/3+/4 can be achieved through ZYX T-DZ. Attitude Control Accuracy:±0.02° - Supported Camera:GOPRO HERO 3/3+/4 - Assistant Software Supporting Platform:Windows XP/VISTA/7/8/10 - Dimensions:230x214x116mm - Weight:360g Max Controllable Rotation Speed: - TILT: ±200 deg/s - ROLL: ±200 deg/s - PAN: ±200 deg/s Controllable Rotation Range: - TILT:-90 deg+125 deg - PAN:-125 deg+125 deg - ROLL:-35 deg+40 deg S-Bus/PPM/DSM receiver support Port Descriptions: 1.
Gimbal Main Controller Port:PWR Power Port;DATA/FC Gimbal Main ControllerAssistant Software Update & Gimbal Data Input Port;5V/RC/AV 5V Power Output & Receiver Input &AV-OUT Port 2. Battery Power Supply: 3S-6S Li (11V-26V) Receiver: 1. Common Receiver: connect it to the CH1/SBUS and CH2 Channel in the gimbal main controller. Also, set Receiver Type and corresponding channel in the assistant software.
FUTABA SBUS or SBUS-2: connect it to CH1/SBUS channel in the gimbal main controller. MAKE SURE CH2 IS UNCONNECTED. If you have 5V power supply to the receiver, please disconnect the 5V power of CH1/SBUS channel. Camera Connect the camera through GoPro Charging &AV-OUT Cable. ZYX T-DZ , the three-axis gimbal, could support the camera to stabilize its positions on the roll, tilt and pan axis.
You could adjust receiver type, working mode, angle range and other options in the assistant software. Attention: When the MODE port is unconnected, the gimbal can only work in the DEFAULT mode. Moreover, during Loader, if the MODE is unconnected suddenly, the working mode would remain the same before disconnection. After powering up the gimbal, if the receiver is unconnected, it works on DEFAULT MODE. Package List: - 1 x Gimbal - 1 x Gimbal Main Controller Module - 1 x 5V OUT & Receiver & AV Cable - 1 x Gimbal Main Controller & Gimbal Connection Cable - 1 x USB module - 1 x GoPro Charging & AV-OUT Cable.
Usually it cost about 35USD-50USD. If you receive defective item, please kindly notify us within 14 days. The item "3-Axis Camera Brushless Gimbal TL3T03 for Tarot Gopro Hero3/3+/4 T-DZ Camera FPV" is in sale since Tuesday, June 12, 2018. This item is in the category "Cameras & Photo\Tripods & Supports\Stabilizers". The seller is "topcyberday" and is located in HK.
This item can be shipped worldwide.